Overview of the mounted watercooling system.
The coolant container is mounted in the right-bottom corner of the case.
In the left-top corner you can see the bridghe rectifier
and capacitors from the TEC power supply. The transformer whuich converts the 220VAC to
18VAC is mounted below the CDROM/DVD drives, and is not visible. The green/yellow wire
wrapped around the hoses
prevent them from collapsing due to the small bending radius. The waterjacket is
invisible on this picture.
Please note that this was a beta setup: the
photo was taken at a LAN party, and I had to get it working.
A closeup of the coolant container.
A closeup of the mounted waterjacket.
The white wire going to the waterjacket is connected to a temperature sensor which monitors the coldplate temperature.
A closeup of the bridge rectifier and capacitors used in the TEC power supply.
The temporary housing of the radiator and the 120mm Sunon fan (not visible).
| 
